Copyright © 2000, 2001, 2002, 2003 The FreeBSD Documentation Project
This document contains the hardware compatibility notes for FreeBSD 5.2.1-RELEASE on the UltraSPARC hardware platform (also referred to as FreeBSD/sparc64 5.2.1-RELEASE). It lists devices known to work on this platform, as well as some notes on boot-time kernel customization that may be useful when attempting to configure support for new devices.
Note: This document includes information specific to the UltraSPARC hardware platform. Versions of the hardware compatibility notes for other architectures will differ in some details.
This section describes the systems currently known to be supported by FreeBSD on the UltraSPARC platform. For background information on the various hardware designs see the Sun System Handbook.
SMP is supported on all systems with more than 1 processor.
If you have a system that is not listed here, it may not have been tested with FreeBSD 5.2.1-RELEASE. We encourage you to try it and send a note to the FreeBSD SPARC porting mailing list with your results, including which devices work and which do not.
The following systems are fully supported by FreeBSD.
Blade 100
Blade 150
Enterprise 220R
Enterprise 250
Enterprise 420R
Enterprise 450
Fire V100
Fire V120
Netra t1 105
Netra T1 AC200/DC200
Netra t 1100
Netra t 1120
Netra t 1125
Netra t 1400/1405
Netra 120
Netra X1
SPARCEngine Ultra AXi
SPARCEngine Ultra AXmp
Ultra 5
Ultra 10
Ultra 30
Ultra 60
Ultra 80
The following systems are partially supported by FreeBSD. In particular the onboard scsi controller in sbus systems is not supported.
Enterprise 3500
Enterprise 4500
Ultra 1 Enterprise (1E for short)
Ultra 2
The following systems are not supported by FreeBSD. This may be due to lack of processor support (UltraSPARC III), due to a quirk in the system design that makes FreeBSD unstable, or due to lack of support for sufficient onboard devices to make FreeBSD generally useful.
All systems containing UltraSPARC III processor(s).
Ultra 1
This section describes the devices currently known to be supported by with FreeBSD on the UltraSPARC platform. Other configurations may also work, but simply have not been tested yet. Feedback, updates, and corrections to this list are encouraged.
Where possible, the drivers applicable to each device or class of devices is listed. If the driver in question has a manual page in the FreeBSD base distribution (most should), it is referenced here. Information on specific models of supported devices, controllers, etc. can be found in the manual pages.
Note: Lists of specific, supported devices are gradually being removed from this document in order to reduce the amount of duplicated (and potentially out-of-date) information contained within. When this process is complete, the manual page for each driver should be consulted for the authoritative list of devices supported that particular driver.
IDE/ATA controllers ( ata(4) driver)
Acard ATP850 UDMA2, ATP860 UDMA4, ATP865 UDMA6
AMD 756 ATA66, 766 ATA100, 768 ATA100
Cenatek Rocket Drive
CMD 646, 648 ATA66, and 649 ATA100
Cypress 82C693
Cyrix 5530 ATA33
HighPoint HPT366 ATA66, HPT370 ATA100, HPT372 ATA133, HPT374 ATA133
Intel PIIX, PIIX3, PIIX4
Intel ICH ATA66, ICH2 ATA100, ICH3 ATA100, ICH4 ATA100
nVidia nForce ATA100, nForce2 ATA133
Promise ATA100 OEM chip (pdc20265)
Promise ATA133 OEM chip (pdc20269)
Promise Fasttrak-33, -66, -100, -100 TX2/TX4, -133 TX2/TX2000
Promise SATA150 TX2/TX4 Serial ATA/150
Promise Ultra-33, -66, -100, -133 TX2/TX2000/TX4000
ServerWorks ROSB4 ATA33
ServerWorks CSB5 and CSB6 ATA66/ATA100
Sil 0680 UDMA6
SiS 530, 540, 550, 620
SiS 630, 630S, 633, 635, 640, 645, 645DX, 648, 650, 651, 652, 655, 658, 730, 733, 735, 740, 745, 746, 748, 750, 751, 752, 755
SiS 5591 ATA100
VIA 82C586 ATA33, 82C596 ATA66, 82C686a ATA66, 82C686b ATA100
VIA 8233, 8235 ATA133
Adaptec AIC-7770, AIC-7850, AIC-7860, AIC-7870, AIC-7880, and AIC789x based SCSI host adapters ( ahc(4) driver)
Ultra-320 SCSI controllers based on the Adaptec AIC7901, AIC7901A, and AIC7902 Ultra320 controller chips ( ahd(4) driver)
LSI/Symbios (formerly NCR) 53C8XX and 53C10XX PCI SCSI controllers, either embedded on motherboard or on add-on boards ( ncr(4) and sym(4) drivers)
Qlogic controllers and variants ( isp(4) driver)
LSI Logic Fusion/MP architecture Fiber Channel controllers ( mpt(4) driver)
With all supported SCSI controllers, full support is provided for SCSI-I, SCSI-II, and SCSI-III peripherals, including hard disks, optical disks, tape drives (including DAT, 8mm Exabyte, Mammoth, and DLT), medium changers, processor target devices and CD-ROM drives. WORM devices that support CD-ROM commands are supported for read-only access by the CD-ROM drivers (such as cd(4)). WORM/CD-R/CD-RW writing support is provided by cdrecord(1), which is a part of the sysutils/cdrtools port in the Ports Collection.
The following CD-ROM type systems are supported at this time:
SCSI interface (also includes ProAudio Spectrum and SoundBlaster SCSI) ( cd(4))
ATAPI IDE interface ( acd(4))
RealTek 8129/8139 Fast Ethernet NICs ( rl(4) driver)
DEC/Intel 21143 Fast Ethernet NICs and clones for PCI, MiniPCI, and CardBus ( dc(4) driver)
Intel 82557-, 82258-, 82559-, 82550- or 82562-based Fast Ethernet NICs ( fxp(4) driver)
Intel EtherExpress Pro/100B PCI Fast Ethernet
Intel PRO/100+ Management Adapter
Intel Pro/100 VE Desktop Adapter
Intel Pro/100 M Desktop Adapter
Intel Pro/100 S Desktop, Server and Dual-Port Server Adapters
3Com Etherlink XL-based NICs ( xl(4) driver)
Sun HME and QFE Ethernet NICs ( hme(4) driver)
Sun GEM (Gigabit Ethernet) and ERI (Fast Ethernet) NICs ( gem(4) driver)
FORE Systems, Inc. PCA-200E ATM PCI Adapters (hfa and fatm(4) drivers)
FORE Systems, Inc. HE155 and HE622 ATM interfaces ( hatm(4) driver)
Serial ports based on the SAB82532 serial chip, console only ( sab(4) driver)
Serial ports based on the Zilog 8530 dual uart, console only (zs driver)
Host Controllers ( fwohci(4) driver)
Serial Bus Protocol 2 (SBP-2) storage devices ( sbp(4) driver)
This file, and other release-related documents, can be downloaded from ftp://ftp.FreeBSD.org/.
For questions about FreeBSD, read the documentation before contacting <[email protected]>.
For questions about this documentation, e-mail <[email protected]>.