Notes sur FreeBSD version 4.1
NOTES DE VERSION
FreeBSD 4.1-RELEASE
Any installation failures or crashes should be reported by using the
send-pr command (those preferring a Web-based interface can also see
http://www.freebsd.org/send-pr.html).
For information about FreeBSD and the layout of the 4.1-RELEASE
directory (especially if you're installing from floppies!), see
ABOUT.TXT. For installation instructions, see the INSTALL.TXT and
HARDWARE.TXT files.
For the latest 4.1-stable snapshots (post-4.1 snaps), you should
always see:
ftp://releng4.freebsd.org/pub/FreeBSD
Table of contents:
------------------
1. What's new since 4.0-RELEASE
1.1 KERNEL CHANGES
1.2 SECURITY FIXES
1.3 USERLAND CHANGES
2. Supported Configurations
2.1 Disk Controllers
2.2 Ethernet cards
2.3 FDDI
2.4 ATM
2.5 Misc
3. Obtaining FreeBSD
3.1 FTP/Mail
3.2 CDROM
4. Upgrading from previous releases of FreeBSD
5. Reporting problems, making suggestions, submitting code
6. Acknowledgements
1. Nouveaut�s depuis la version 4.0-RELEASE
-------------------------------------------
1.1. NOYAU
----------
FreeBSD 4.1-RELEASE inclu le code mis � jour du projet KAME
(http://www.kame.net) ce qui comprend les fonctionnalit�s suivantes :
* Am�lioration significative des fonctions IPSEC. En particulier, les associations
de s�curit� IPSEC n'ont plus besoin d'�tre pr�cis�es manuellement : le nouveau code
supporte racoon, le d�mon IKE de KAME, qui est disponible dans
/usr/ports/security/racoon. Racoon communique tr�s bien avec d'autres syst�mes
IKE, ce qui signifie que FreeBSD 4.1 peut �tre utilis� dans un environnement IPSEC
h�t�rog�ne. Cependant, racoon *est* toujours un projet en d�veloppement, ce qui
signifie qu'il peut encore y avoir des bugs, des changements de syntaxe
pour la configuration, etc.
* 9 mois de corrections et d'am�liorations au code IPv6 par rapport � ce qui
existait dans FreeBSD 4.0-RELEASE.
* FreeBSD 4.1 peut maintenant �tre install� dans un r�seau uniquement IPv6 - c'est la
premi�re version de FreeBSD qui peut fonctionner sans avoir besoin d'utiliser IPv4 !
ftp7.jp.freebsd.org (list� en tant que "Japan #7" dans le programme d'installation "sysinstall")
est un site miroir accessible en IPv6 pour l'installation et le t�l�chargement de
logiciels port�s sous FreeBSD.
* Le syst�me de contr�le de trafic r�seau ALTQ n'a pas encore �t� int�gr� - il le sera
si tout va bien avant la sortie de la version 4.2. Le code le plus exp�rimental de
KAME n'a pas non plus �t� int�gr�. Si vous avez besoin de ces fonctions, vous pouvez
utiliser la 4.1-RELEASE+KAME sur ftp://ftp.kame.net qui sera disponible apr�s la
sortie de la version 4.1-RELEASE.
* PROBLEME CONNU : les montages NFS � travers IPSEC ne semblent pas fonctionner de mani�re
fiable dans tous les cas - le montage se coupe et des corruptions de donn�es ont �t�
constat�es.
Une nouvelle notification d'�v�nement appel�e "kqueue" a �t� ajout�e au noyau
FreeBSD. C'est une nouvelle interface qui peut remplacer "poll/select",
en offrant une meilleure performance ainsi que la possibilit� de rapporter
de nombreux differents types d'�v�nements. Le support pour la surveillance des
changements dans les sockets, pipes, fifos et fichiers est pr�sent ainsi que
pour les signaux et les processus.
Le support pour le "Wired for Management 2.0" (PXE) de Intel a �t� ajout� au
gestionnaire de d�marrage de FreeBSD. A cause de diff�rences dans l'interface de
programmation (API), les anciennes versions de PXE ne sont pas support�es. Cela
permet un d�marrage par r�seau avec DHCP.
Concernant la version de FreeBSD pour les syst�mes Alpha :
FreeBSD/alpha inclu d�sormais un chargeur avec FICL (support de Forth) int�gr�.
Les ports parall�les sont maintenant support�s.
De nouveaux types de syst�mes Alpha sont maintenant support�s. Veuillez
consulter le fichier HARDWARE.TXT pour plus de d�tails.
Les AlphaServer 4100 (Rawhide) n'autorisent pas l'installation par
disquettes ou cdrom. Une parade est d'installer en utilisant une autre machine
Alpha et de d�placer le disque sur la machine AS4100. Une fois install�, FreeBSD
fonctionne parfaitement.
Les AlphaServer 2100A (Lynx) ne sont pas support�s dans cette version. Notez que
les AlphaServer 2100 (Sable) fonctionnent sans probl�me.
Les machines avec interfaces IDE int�gr�es et dont le SRM permet le d�marrage depuis
ces disques sont maintenant support�es avec le disque IDE comme p�riph�rique
racine/de d�marrage. Consultez le fichier HARDWARE.TXT pour les sp�cificit�s
des machines comme la vitesse, l'utilisation du DMA etc.
Notez que les consoles TGA (int�gr�es ou sur cartes d'extension TGA) ne fonctionneront
pas. Vous devrez utiliser une console s�rie ou installer une carte VGA.
1.2. SECURITE
-------------
Le noyau ainsi que les applications utilisateurs ont �t� inspect�s afin de rechercher
les bugs et les trous de s�curit� li�s � l'utilisation incorrecte des cha�nes de
format dans les fonctions de type vfprintf(). Aucune vuln�rabilit� n'a �t� d�couverte.
Pour les corrections suppl�mentaires li�es � la s�curit�, consultez la liste des
"Conseils de S�curit�" � l'adresse http://www.freebsd.org/security/
1.3. PROGRAMMES UTILISATEUR
---------------------------
Support du d�mon IKE de KAME, racoon, comme indiqu� ci-dessus.
Plusieurs utilitaires syst�mes suppl�mentaires (whois, fetch et sans doute
bien d'autres) peuvent maintenant �tre utilis�s avec IPv6.
cdcontrol(1) supporte d�sormais une commande "cdid" qui calcule et
affiche le num�ro de s�rie du CD en utilisant le m�me algorithme que
celui de la base de donn�es CDDB.
mtree(8) inclu maintenant le support pour un fichier listant les noms de
chemins devant �tre exclus lors de la cr�ation et de la v�rification des prototypes.
Cela rend plus facile l'utilisation de mtree en tant que composant d'un
syst�me de d�tection d'intrusion.
Le syst�me de mot de passe unique OPIE a �t� mis � jour avec la version 2.32.
OpenSSH a �t� mis � jour avec la version 2.1.0 qui permet le support du
protocole SSH2 y compris les clefs DSA. Par cons�quent, les utilisateurs de OpenSSH
situ�s aux Etats-Unis n'ont plus besoin de s'en remettre au jeu d'outils RSAREF �
la licence restrictive qui est requis pour g�rer les clefs RSA. OpenSSH 2.1 s'int�gre
tr�s bien avec les autres clients et serveurs SSH2, y compris le port ssh2. Consultez
http://www.openssh.com pour plus de d�tails.
OpenSSH peut maintenant faire l'authentification en utilisant les mots de passe OPIE
en mode SSH1. Ce support n'est pas encore disponible en mode SSH2.
camcontrol(8) inclu d�sormais une fonction "format" int�gr�e pour le formatage
bas-niveau des disques SCSI.
Le support des p�riph�riques USB a �t� ajout� au noyau GENERIC et aux programmes
d'installation afin de supporter d'origine les p�riph�riques USB. Notez qu'un
clavier AT doit encore �tre utilis� durant l'installation initiale mais devrait
fonctionner sans probl�me ensuite.
Tout le m�canisme de boot des syst�mes i386 a �t� corrig� pour supporter la d�tection
automatique et l'utilisation des extensions BIOS de Gestion de Disque Avanc� afin de
supporter le boot au del� du 1023�me cylindre. En raison de ce changement, le gestionnaire
de d�marrage de FreeBSD (boot0) est pass� d'une taille de 1 secteur (512 octets) � 2
secteurs (1024 octets). Plusieurs changements ont donc �t� faits pour g�rer les
chargeurs de boot MBR de tailles variables.
libfetch a �t� grandement am�lior�. fetch(1) et les outils pkg utilisent dor�navant
libfetch au lieu de libftpio, ce qui signifie que les outils pkg ont gagn� le
support du HTTP et que les deux ont gagn� le support IPv6.
Le shell csh(1) a �t� remplac� par tcsh(1) bien qu'il puisse �tre encore
utilis� comme csh(1).
La commande more(1) a �t� remplac�e par less(1) bien qu'elle puisse �tre
encore utilis�e comme more(1).
ls(1) peut produire des listes de fichiers en couleur avec l'option -G (et un
terminal appropri�).
2. Supported Configurations
---------------------------
FreeBSD currently runs on a wide variety of ISA, VLB, EISA, MCA and PCI
bus based PC's, ranging from 386sx to Pentium class machines (though the
386sx is not recommended). Support for generic IDE or ESDI drive
configurations, various SCSI controller, network and serial cards is
also provided.
What follows is a list of all peripherals currently known to work with
FreeBSD. Other configurations may also work, we have simply not as yet
received confirmation of this.
2.1. Disk Controllers
---------------------
WD1003 (any generic MFM/RLL)
WD1007 (any generic IDE/ESDI)
IDE
ATA
Adaptec 1535 ISA SCSI controllers
Adaptec 154x series ISA SCSI controllers
Adaptec 164x series MCA SCSI controllers
Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
EISA/VLB/PCI SCSI controllers.
Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
Adaptec 152x series ISA SCSI controllers
Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
and SoundBlaster SCSI cards.
AdvanSys SCSI controllers (all models).
BusLogic MultiMaster controllers:
[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
BusLogic MultiMaster "W" Series Host Adapters:
BT-948, BT-958, BT-958D
BusLogic MultiMaster "C" Series Host Adapters:
BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
BT-540CF
BusLogic MultiMaster "S" Series Host Adapters:
BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
BT-542B
BusLogic MultiMaster "A" Series Host Adapters:
BT-742A, BT-542B
AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
supported.
The Buslogic/Bustek BT-640 and Storage Dimensions SDC3211B and SDC3211F
Microchannel (MCA) bus adapters are also supported.
DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
SmartRAID IV SCSI/RAID controllers are supported. The DPT SmartRAID/CACHE V
is not yet supported.
AMI MegaRAID Express and Enterprise family RAID controllers:
MegaRAID 418
MegaRAID Enterprise 1200 (428)
MegaRAID Enterprise 1300
MegaRAID Enterprise 1400
MegaRAID Enterprise 1500
MegaRAID Elite 1500
MegaRAID Express 200
MegaRAID Express 300
Dell PERC
Dell PERC 2/SC
Dell PERC 2/DC
Some HP NetRAID controllers are OEM versions of AMI designs, and
these are also supported. Booting from these controllers is supported.
Mylex DAC960 and DAC1100 RAID controllers with 2.x, 3.x, 4.x and 5.x
firmware:
DAC960P
DAC960PD
DAC960PDU
DAC960PL
DAC960PJ
DAC960PG
AcceleRAID 150
AcceleRAID 250
eXtremeRAID 1100
Booting from these controllers is supported. EISA adapters are not
supported.
SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
ASUS SC-200
Data Technology DTC3130 (all variants)
Diamond FirePort (all)
NCR cards (all)
Symbios cards (all)
Tekram DC390W, 390U and 390F
Tyan S1365
QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters.
QLogic 2100 Fibre Channel Adapters (private loop only).
DTC 3290 EISA SCSI controller in 1542 emulation mode.
With all supported SCSI controllers, full support is provided for
SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
tape drives (including DAT and 8mm Exabyte), medium changers, processor
target devices and CDROM drives. WORM devices that support CDROM commands
are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW
writing support is provided by cdrecord, which is in the ports tree.
The following CD-ROM type systems are supported at this time:
(cd) SCSI interface (also includes ProAudio Spectrum and
SoundBlaster SCSI)
(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
interface (562/563 models)
(scd) Sony proprietary interface (all models)
(acd) ATAPI IDE interface
The following drivers were supported under the old SCSI subsystem, but are
NOT YET supported under the new CAM SCSI subsystem:
NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller.
UltraStor 14F, 24F and 34F SCSI controllers.
Seagate ST01/02 SCSI controllers.
Future Domain 8xx/950 series SCSI controllers.
WD7000 SCSI controller.
[ Note: There is work-in-progress to port the UltraStor driver to
the new CAM SCSI framework, but no estimates on when or if it will
be completed. ]
Unmaintained drivers, they might or might not work for your hardware:
(mcd) Mitsumi proprietary CD-ROM interface (all models)
2.2. Ethernet cards
-------------------
Adaptec Duralink PCI Fast Ethernet adapters based on the Adaptec
AIC-6915 Fast Ethernet controller chip, including the following:
ANA-62011 64-bit single port 10/100baseTX adapter
ANA-62022 64-bit dual port 10/100baseTX adapter
ANA-62044 64-bit quad port 10/100baseTX adapter
ANA-69011 32-bit single port 10/100baseTX adapter
ANA-62020 64-bit single port 100baseFX adapter
Allied-Telesis AT1700 and RE2000 cards
Alteon Networks PCI Gigabit Ethernet NICs based on the Tigon 1 and Tigon 2
chipsets, including the following:
Alteon AceNIC (Tigon 1 and 2)
3Com 3c985-SX (Tigon 1 and 2)
Netgear GA620 (Tigon 2)
Silicon Graphics Gigabit Ethernet
DEC/Compaq EtherWORKS 1000
NEC Gigabit Ethernet
AMD PCnet/PCI (79c970 & 53c974 or 79c974)
SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E,
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
based clones. SMC Elite Ultra. SMC Etherpower II.
RealTek 8129/8139 Fast Ethernet NICs including the following:
Allied Telesyn AT2550
Allied Telesyn AT2500TX
Genius GF100TXR (RTL8139)
NDC Communications NE100TX-E
OvisLink LEF-8129TX
OvisLink LEF-8139TX
Netronix Inc. EA-1210 NetEther 10/100
KTX-9130TX 10/100 Fast Ethernet
Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
SMC EZ Card 10/100 PCI 1211-TX
Lite-On 82c168/82c169 PNIC Fast Ethernet NICs including the following:
LinkSys EtherFast LNE100TX
NetGear FA310-TX Rev. D1
Matrox FastNIC 10/100
Kingston KNE110TX
Macronix 98713, 98713A, 98715, 98715A and 98725 Fast Ethernet NICs
NDC Communications SFA100A (98713A)
CNet Pro120A (98713 or 98713A)
CNet Pro120B (98715)
SVEC PN102TX (98713)
Macronix/Lite-On PNIC II LC82C115 Fast Ethernet NICs including the following:
LinkSys EtherFast LNE100TX Version 2
Winbond W89C840F Fast Ethernet NICs including the following:
Trendware TE100-PCIE
VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" Fast Ethernet
NICs including the following:
Hawking Technologies PN102TX
D-Link DFE-530TX
AOpen/Acer ALN-320
Silicon Integrated Systems SiS 900 and SiS 7016 PCI Fast Ethernet NICs
Sundance Technologies ST201 PCI Fast Ethernet NICs including
the following:
D-Link DFE-550TX
SysKonnect SK-984x PCI Gigabit Ethernet cards including the following:
SK-9841 1000baseLX single mode fiber, single port
SK-9842 1000baseSX multimode fiber, single port
SK-9843 1000baseLX single mode fiber, dual port
SK-9844 1000baseSX multimode fiber, dual port
Texas Instruments ThunderLAN PCI NICs, including the following:
Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
Racore 8165 10/100baseTX
Racore 8148 10baseT/100baseTX/100baseFX multi-personality
ADMtek Inc. AL981-based PCI Fast Ethernet NICs
ADMtek Inc. AN985-based PCI Fast Ethernet NICs
ADMtek Inc. AN986-based USB Ethernet NICs including the following:
LinkSys USB100TX
Billionton USB100
Melco Inc. LU-ATX
D-Link DSB-650TX
SMC 2202USB
CATC USB-EL1210A-based USB Ethernet NICs including the following:
CATC Netmate
CATC Netmate II
Belkin F5U111
Kawasaki LSI KU5KUSB101B-based USB Ethernet NICs including
the following:
LinkSys USB10T
Entrega NET-USB-E45
Peracom USB Ethernet Adapter
3Com 3c19250
ADS Technologies USB-10BT
ATen UC10T
Netgear EA101
D-Link DSB-650
SMC 2102USB
SMC 2104USB
Corega USB-T
ASIX Electronics AX88140A PCI NICs, including the following:
Alfa Inc. GFC2204
CNet Pro110B
DEC EtherWORKS III NICs (DE203, DE204, and DE205)
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
Davicom DM9100 and DM9102 PCI Fast Ethernet NICs, including the
following:
Jaton Corporation XpressNet
Fujitsu MB86960A/MB86965A
HP PC Lan+ cards (model numbers: 27247B and 27252A).
Intel EtherExpress 16
Intel EtherExpress Pro/10
Intel EtherExpress Pro/100B PCI Fast Ethernet
Intel InBusiness 10/100 PCI Network Adapter
Intel PRO/100+ Management Adapter
Isolan AT 4141-0 (16 bit)
Isolink 4110 (8 bit)
Novell NE1000, NE2000, and NE2100 Ethernet interface.
PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
Winbond W89C940, Surecom NE-34, VIA VT86C926.
3Com 3C501 cards
3Com 3C503 Etherlink II
3Com 3c505 Etherlink/+
3Com 3C507 Etherlink 16/TP
3Com 3C509, 3C529 (MCA), 3C579,
3C589/589B/589C/589D/589E/XE589ET/574TX/574B (PC-card/PCMCIA),
3C590/592/595/900/905/905B/905C PCI
and EISA (Fast) Etherlink III / (Fast) Etherlink XL
3Com 3c980/3c980B Fast Etherlink XL server adapter
3Com 3cSOHO100-TX OfficeConnect adapter
Toshiba Ethernet cards
Crystal Semiconductor CS89x0-based NICs, including:
IBM Etherjet ISA
NE2000 compatible PC-Card (PCMCIA) Ethernet/FastEthernet cards,
including the following:
AR-P500 Ethernet card
Accton EN2212/EN2216/UE2216(OEM)
Allied Telesis CentreCOM LA100-PCM_V2
AmbiCom 10BaseT card
BayNetworks NETGEAR FA410TXC Fast Ethernet
CNet BC40 adapter
COREGA Ether PCC-T/EtherII PCC-T
Compex Net-A adapter
CyQ've ELA-010
D-Link DE-650/660
Danpex EN-6200P2
IO DATA PCLATE
IBM Creditcard Ethernet I/II
IC-CARD Ethernet/IC-CARD+ Ethernet
Linksys EC2T/PCMPC100
Melco LPC-T
NDC Ethernet Instant-Link
National Semiconductor InfoMover NE4100
Network Everywhere Ethernet 10BaseT PC Card
Planex FNW-3600-T
Socket LP-E
Surecom EtherPerfect EP-427
Telecom Device SuperSocket RE450T
Megahertz X-Jack Ethernet PC-Card CC-10BT
2.3. FDDI
---------
DEC FDDI (DEFPA/DEFEA) NICs
2.4. ATM
--------
o ATM Host Interfaces
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
2.5. Misc
---------
AST 4 port serial card using shared IRQ.
ARNET 8 port serial card using shared IRQ.
ARNET (now Digiboard) Sync 570/i high-speed serial.
Boca BB1004 4-Port serial card (Modems NOT supported)
Boca IOAT66 6-Port serial card (Modems supported)
Boca BB1008 8-Port serial card (Modems NOT supported)
Boca BB2016 16-Port serial card (Modems supported)
Comtrol Rocketport card.
Cyclades Cyclom-y Serial Board.
STB 4 port card using shared IRQ.
SDL Communications Riscom/8 Serial Board.
SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
ONboard 4/16 and Brumby.
Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules.
Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
and Roland MPU-401 sound cards. (snd driver)
Most ISA audio codecs manufactured by Crystal Semiconductors, OPTi, Creative
Labs, Avance, Yamaha and ENSONIQ. (pcm driver)
Connectix QuickCam
Matrox Meteor Video frame grabber
Creative Labs Video Spigot frame grabber
Cortex1 frame grabber
Hauppauge Wincast/TV boards (PCI)
STB TV PCI
Intel Smart Video Recorder III
Various Frame grabbers based on Brooktree Bt848 / Bt878 chip.
HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
PS/2 mice
Standard PC Joystick
X-10 power controllers
GPIB and Transputer drivers.
Genius and Mustek hand scanners.
Xilinx XC6200 based reconfigurable hardware cards compatible with
the HOT1 from Virtual Computers (www.vcc.com)
Support for Dave Mills experimental Loran-C receiver.
Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
(NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS, and Melco
Airconnect). Note: the ISA versions of these adapters are actually PCMCIA
cards combined with an ISA to PCMCIA bridge card, so both kinds of
devices work with the same driver.
Aironet 4500/4800 series 802.11 wireless adapters. The PCMCIA,
PCI and ISA adapters are all supported.
3. Obtaining FreeBSD
--------------------
You may obtain FreeBSD in a variety of ways:
3.1. FTP/Mail
-------------
You can ftp FreeBSD and any or all of its optional packages from
`ftp.freebsd.org' - the official FreeBSD release site.
For other locations that mirror the FreeBSD software see the file
MIRROR.SITES. Please ftp the distribution from the site closest (in
networking terms) to you. Additional mirror sites are always welcome!
Contact [email protected] for more details if you'd like to
become an official mirror site.
3.2. CDROM
----------
FreeBSD 4.1-RELEASE and 3.x-RELEASE CDs may be ordered on CDROM from:
BSDi
4041 Pike Lane, Suite F
Concord CA 94520
1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX)
Or via the Internet from [email protected] or http://www.freebsdmall.com.
Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a
FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely
separate). With a subscription, you will automatically receive updates as
they are released. Your credit card will be billed when each disk is
shipped and you may cancel your subscription at any time without further
obligation.
Shipping (per order not per disc) is $5 in the US, Canada or Mexico
and $9.00 overseas. They accept Visa, Mastercard, Discover, American
Express or checks in U.S. Dollars and ship COD within the United
States. California residents please add 8.25% sales tax.
Should you be dissatisfied for any reason, the CD comes with an
unconditional return policy.
4. Upgrading from previous releases of FreeBSD
----------------------------------------------
If you're upgrading from a previous release of FreeBSD, most likely
it's 3.0 and there may be some issues affecting you, depending
of course on your chosen method of upgrading. There are two popular
ways of upgrading FreeBSD distributions:
o Using sources, via /usr/src
o Using sysinstall's (binary) upgrade option.
Please read the UPGRADE.TXT file for more information, preferably
before beginning an upgrade.
5. Reporting problems, making suggestions, submitting code.
-----------------------------------------------------------
Your suggestions, bug reports and contributions of code are always
valued - please do not hesitate to report any problems you may find
(preferably with a fix attached, if you can!).
The preferred method to submit bug reports from a machine with
Internet mail connectivity is to use the send-pr command or use the CGI
script at http://www.freebsd.org/send-pr.html. Bug reports
will be dutifully filed by our faithful bugfiler program and you can
be sure that we'll do our best to respond to all reported bugs as soon
as possible. Bugs filed in this way are also visible on our WEB site
in the support section and are therefore valuable both as bug reports
and as "signposts" for other users concerning potential problems to
watch out for.
If, for some reason, you are unable to use the send-pr command to
submit a bug report, you can try to send it to:
[email protected]
Note that send-pr itself is a shell script that should be easy to move
even onto a totally different system. We much prefer if you could use
this interface, since it make it easier to keep track of the problem
reports. However, before submitting, please try to make sure whether
the problem might have already been fixed since.
Otherwise, for any questions or tech support issues, please send mail to:
[email protected]
If you're tracking the -stable development efforts, you should
definitely join the -stable mailing list, in order to keep abreast
of recent developments and changes that may affect the way you
use and maintain the system:
[email protected]
Additionally, being a volunteer effort, we are always happy to have
extra hands willing to help - there are already far more desired
enhancements than we'll ever be able to manage by ourselves! To
contact us on technical matters, or with offers of help, please send
mail to:
[email protected]
Please note that these mailing lists can experience *significant*
amounts of traffic and if you have slow or expensive mail access and
are only interested in keeping up with significant FreeBSD events, you
may find it preferable to subscribe instead to:
[email protected]
All of the mailing lists can be freely joined by anyone wishing
to do so. Send mail to [email protected] and include the keyword
`help' on a line by itself somewhere in the body of the message. This
will give you more information on joining the various lists, accessing
archives, etc. There are a number of mailing lists targeted at
special interest groups not mentioned here, so send mail to majordomo
and ask about them!
6. Acknowledgements
-------------------
FreeBSD represents the cumulative work of many dozens, if not
hundreds, of individuals from around the world who have worked very
hard to bring you this release. For a complete list of FreeBSD
project staffers, please see:
http://www.freebsd.org/handbook/staff.html
or, if you've loaded the doc distribution:
file:/usr/share/doc/handbook/staff.html
Special mention to:
The donors listed at http://www.freebsd.org/handbook/donors.html
and to the many thousands of FreeBSD users and testers all over the
world, without whom this release simply would not have been possible.
We sincerely hope you enjoy this release of FreeBSD!
The FreeBSD Project
Release Home
